{"version":1,"pages":[{"id":"-MDuoSA75do2xVhZjJ_l","title":"Project PANOPTES","pathname":"/","siteSpaceId":"sitesp_djzcg","description":"A citizen science project that aims to make it easy for anyone to build a low cost, robotic telescope that can be used to detect transiting exoplanets."},{"id":"-MDvC1gyC6p66G7ztP5A","title":"FAQ","pathname":"/overview/faq","siteSpaceId":"sitesp_djzcg","emoji":"1f937-2640","description":"Frequently Asked Questions","breadcrumbs":[{"label":"Overview"}]},{"id":"hhEXc5lOq0IJDz1iEU0V","title":"PANOPTES Units","pathname":"/overview/panoptes-units","siteSpaceId":"sitesp_djzcg","emoji":"1f916","description":"Someone's gotta build these robots!","breadcrumbs":[{"label":"Overview"}]},{"id":"O01JdacpGajBm9n5FUJS","title":"Contact","pathname":"/overview/contact","siteSpaceId":"sitesp_djzcg","emoji":"260e","description":"How to contact the PANOPTES team.","breadcrumbs":[{"label":"Overview"}]},{"id":"-MEi55Rwc2duqh3gfBGi","title":"Start Building!","pathname":"/build/getting-started","siteSpaceId":"sitesp_djzcg","emoji":"1f52d","description":"Ready to build a PANOPTES unit? Have a technical question about the setup? Curious about what that even means? This section is for you!","breadcrumbs":[{"label":"Building Docs"}]},{"id":"-MEst6BWKTH7yEbC7lEy","title":"Building Overview","pathname":"/build/getting-started/building-overview","siteSpaceId":"sitesp_djzcg","description":"A high-level overview of the build process.","breadcrumbs":[{"label":"Building Docs"},{"label":"Start Building!","emoji":"1f52d"}]},{"id":"-MEsoaCj5KnaWwuNzX-2","title":"Safety Guide","pathname":"/build/getting-started/safety-guide","siteSpaceId":"sitesp_djzcg","description":"Tips for safely building a PANOPTES unit.","breadcrumbs":[{"label":"Building Docs"},{"label":"Start Building!","emoji":"1f52d"}]},{"id":"-MEt-w72hJUaL-jweLCe","title":"Parts Listing","pathname":"/build/getting-started/parts-listing","siteSpaceId":"sitesp_djzcg","description":"","breadcrumbs":[{"label":"Building Docs"},{"label":"Start Building!","emoji":"1f52d"}]},{"id":"-MEsmPzjjzR7LTWiGqAX","title":"Hardware","pathname":"/build/hardware","siteSpaceId":"sitesp_djzcg","emoji":"1f6e0","description":"Instructions for the construction of a PANOPTES unit.","breadcrumbs":[{"label":"Building Docs"}]},{"id":"-MEspIPX8qSAnApHO-5n","title":"Control Box","pathname":"/build/hardware/control-box","siteSpaceId":"sitesp_djzcg","description":"","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"}]},{"id":"-MThODix71E6nc0tZP41","title":"Electronics","pathname":"/build/hardware/control-box/electronics","siteSpaceId":"sitesp_djzcg","description":"","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"},{"label":"Control Box"}]},{"id":"-MEspWXBaPSJlYc4MBfx","title":"Hardware and Assembly","pathname":"/build/hardware/control-box/box-construction","siteSpaceId":"sitesp_djzcg","description":"","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"},{"label":"Control Box"}]},{"id":"-MEsvAABfT6Wd1pHVbPy","title":"Network Setup","pathname":"/build/hardware/control-box/network-setup","siteSpaceId":"sitesp_djzcg","description":"Setting up the router.","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"},{"label":"Control Box"}]},{"id":"-MEsrNaqTbuyJfVSKiiT","title":"Power Distribution","pathname":"/build/hardware/control-box/12v-power-distribution","siteSpaceId":"sitesp_djzcg","description":"After converting the mains power to a 12V system, this guide describes how to set up the distribution system so you can power the different components.","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"},{"label":"Control Box"}]},{"id":"-MEsp4xFOedrGy8LLRx0","title":"Camera Box","pathname":"/build/hardware/camera-box","siteSpaceId":"sitesp_djzcg","description":"","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"}]},{"id":"-MLU7wDdK1wf97BglToU","title":"Camera Setup","pathname":"/build/hardware/camera-box/camera-setup","siteSpaceId":"sitesp_djzcg","description":"This page lists the camera settings to check before securing the camera inside the camera box.","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"},{"label":"Camera Box"}]},{"id":"-MTgmwrQUJwmxLZO7mA3","title":"Electronics","pathname":"/build/hardware/camera-box/electronics","siteSpaceId":"sitesp_djzcg","description":"How to configure the electronics inside the camera box.","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"},{"label":"Camera Box"}]},{"id":"-MThNkIbdCxFE6QtF0xe","title":"Hardware and Assembly","pathname":"/build/hardware/camera-box/hardware-and-assembly","siteSpaceId":"sitesp_djzcg","description":"How to physically put all the camera parts together inside the box.","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"},{"label":"Camera Box"}]},{"id":"sPd8d8TV8kBT0CINRQ78","title":"4 Camera Design","pathname":"/build/hardware/camera-box/4-camera-design","siteSpaceId":"sitesp_djzcg","description":"This is an optional upgrade for builders wanting to upgrade their 2 camera PANOPTES unit to a 4 camera PANOPTES unit.","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"},{"label":"Camera Box"}]},{"id":"-MEspM_FRyZ38mGsUMEy","title":"Mount and Pier","pathname":"/build/hardware/mount-and-pier","siteSpaceId":"sitesp_djzcg","description":"The documentation describes the steps involved in building a pier to support an equatorial mount and the camera box.","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"}]},{"id":"9EusaEnShSqIDBozPfUV","title":"Pier","pathname":"/build/hardware/mount-and-pier/pier","siteSpaceId":"sitesp_djzcg","description":"","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"},{"label":"Mount and Pier"}]},{"id":"nl8wRRJ56c0Q1Z2GnhE1","title":"Fabrication","pathname":"/build/hardware/mount-and-pier/pier/fabrication","siteSpaceId":"sitesp_djzcg","description":"","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"},{"label":"Mount and Pier"},{"label":"Pier"}]},{"id":"K8nmLNVJQ1XdJUJMcqwl","title":"Assembly","pathname":"/build/hardware/mount-and-pier/pier/assembly","siteSpaceId":"sitesp_djzcg","description":"","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"},{"label":"Mount and Pier"},{"label":"Pier"}]},{"id":"8olYQs4Rv4a15GujEyYo","title":"Mount","pathname":"/build/hardware/mount-and-pier/mount","siteSpaceId":"sitesp_djzcg","description":"","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"},{"label":"Mount and Pier"}]},{"id":"i8Oy2VozHng66HxNSqRt","title":"Assembly","pathname":"/build/hardware/mount-and-pier/mount/assembly","siteSpaceId":"sitesp_djzcg","description":"","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"},{"label":"Mount and Pier"},{"label":"Mount"}]},{"id":"oEIIMKtKA5zTsa00OHiw","title":"Saddle Plate Rotation","pathname":"/build/hardware/mount-and-pier/mount/saddle-plate-rotation","siteSpaceId":"sitesp_djzcg","description":"Certain mounts (like the iOptron CEM40) might require their top plate to be rotated so the camera boxes face North when teh mount is set to its zero position.","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"},{"label":"Mount and Pier"},{"label":"Mount"}]},{"id":"-MEsuqx9KGlEdQ3QeWqi","title":"Balancing","pathname":"/build/hardware/mount-and-pier/mount/balancing-the-mount","siteSpaceId":"sitesp_djzcg","description":"How to balance a German Equatorial mount","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"},{"label":"Mount and Pier"},{"label":"Mount"}]},{"id":"JnNSSM75wX2PpxI5dzQB","title":"Weather Station","pathname":"/build/hardware/weather-station","siteSpaceId":"sitesp_djzcg","description":"Is it raining?","breadcrumbs":[{"label":"Building Docs"},{"label":"Hardware","emoji":"1f6e0"}]},{"id":"-MEuYAldqYpRl9xsoAbY","title":"Software","pathname":"/build/software","siteSpaceId":"sitesp_djzcg","emoji":"1f469-1f4bb","description":"Software makes the hardware go!","breadcrumbs":[{"label":"Building Docs"}]},{"id":"UDEi8L42eiOJuc0HNQaB","title":"Installation","pathname":"/build/software/installation","siteSpaceId":"sitesp_djzcg","description":"How to install software to make your unit go!","breadcrumbs":[{"label":"Building Docs"},{"label":"Software","emoji":"1f469-1f4bb"}]},{"id":"-MEt-hoziu53qTGfUGH9","title":"Installing OS","pathname":"/build/software/installation/pocs-installation","siteSpaceId":"sitesp_djzcg","description":"A guide to installing the operating system for Raspberry Pi.","breadcrumbs":[{"label":"Building Docs"},{"label":"Software","emoji":"1f469-1f4bb"},{"label":"Installation"}]},{"id":"-MS1JbmVGJQ3BvqgX6jU","title":"Installing POCS","pathname":"/build/software/installation/installing-pocs","siteSpaceId":"sitesp_djzcg","description":"A guide to installing the PANOPTES Observatory Control Software.","breadcrumbs":[{"label":"Building Docs"},{"label":"Software","emoji":"1f469-1f4bb"},{"label":"Installation"}]},{"id":"-MLzUaMtH_uvWa-TaKbg","title":"Installing PowerBoard","pathname":"/build/software/installation/power-distribution-arduino-software","siteSpaceId":"sitesp_djzcg","description":"How to install the PowerBoard (“Trucker Board”) sketch onto the Arduino power distribution board.","breadcrumbs":[{"label":"Building Docs"},{"label":"Software","emoji":"1f469-1f4bb"},{"label":"Installation"}]},{"id":"LtMuX9jNsBCAGK8cTMdN","title":"Configuration","pathname":"/build/software/configuration","siteSpaceId":"sitesp_djzcg","description":"Configure your unit to make it work for you!","breadcrumbs":[{"label":"Building Docs"},{"label":"Software","emoji":"1f469-1f4bb"}]},{"id":"cEcLLr4bTNQi0hGd29oH","title":"POCS Command Line","pathname":"/build/software/pocs-command-line","siteSpaceId":"sitesp_djzcg","description":"Describes the functions of the pocs command line.","breadcrumbs":[{"label":"Building Docs"},{"label":"Software","emoji":"1f469-1f4bb"}]},{"id":"mMMPqRla5CQzvnJsPEYj","title":"Mount","pathname":"/build/software/pocs-command-line/mount","siteSpaceId":"sitesp_djzcg","description":"Basic interaction with the mount using the command line.","breadcrumbs":[{"label":"Building Docs"},{"label":"Software","emoji":"1f469-1f4bb"},{"label":"POCS Command Line"}]},{"id":"Veuwz4bDh97ixIBcGcxq","title":"Config Server","pathname":"/build/software/pocs-command-line/config-server","siteSpaceId":"sitesp_djzcg","description":"Get and set values in the config server via the command line","breadcrumbs":[{"label":"Building Docs"},{"label":"Software","emoji":"1f469-1f4bb"},{"label":"POCS Command Line"}]},{"id":"9C7rlY3t2TN2vriZ0FH7","title":"PowerBoard","pathname":"/build/software/pocs-command-line/powerboard","siteSpaceId":"sitesp_djzcg","description":"Interact with the PowerBoard","breadcrumbs":[{"label":"Building Docs"},{"label":"Software","emoji":"1f469-1f4bb"},{"label":"POCS Command Line"}]},{"id":"w9F4YE8qqDm1GDdIPyxN","title":"Weather Station","pathname":"/build/software/pocs-command-line/weather-station","siteSpaceId":"sitesp_djzcg","description":"Interact with the weather station.","breadcrumbs":[{"label":"Building Docs"},{"label":"Software","emoji":"1f469-1f4bb"},{"label":"POCS Command Line"}]},{"id":"O3TqdxqMAxnsQN0bfdMG","title":"Appendix","pathname":"/build/software/appendix","siteSpaceId":"sitesp_djzcg","description":"Additional software pages that explain how to work with your unit.","breadcrumbs":[{"label":"Building Docs"},{"label":"Software","emoji":"1f469-1f4bb"}]},{"id":"crchVcYzLscUtWDfUNSd","title":"SSH Access","pathname":"/build/software/appendix/ssh-access","siteSpaceId":"sitesp_djzcg","description":"How to remotely connect to your new OS.","breadcrumbs":[{"label":"Building Docs"},{"label":"Software","emoji":"1f469-1f4bb"},{"label":"Appendix"}]},{"id":"MHkdh6pstJR3haFZD4Zu","title":"Command Line & The Shell","pathname":"/build/software/appendix/command-line-and-the-shell","siteSpaceId":"sitesp_djzcg","description":"Describes the basic steps of how to use the command line.","breadcrumbs":[{"label":"Building Docs"},{"label":"Software","emoji":"1f469-1f4bb"},{"label":"Appendix"}]},{"id":"c7HkUum1mOnKMazHFsDC","title":"tmux / byobu","pathname":"/build/software/appendix/tmux-byobu","siteSpaceId":"sitesp_djzcg","description":"How to stay connected.","breadcrumbs":[{"label":"Building Docs"},{"label":"Software","emoji":"1f469-1f4bb"},{"label":"Appendix"}]},{"id":"11ku8MiffdYiSCDCIgLR","title":"Services","pathname":"/build/software/appendix/services","siteSpaceId":"sitesp_djzcg","description":"Things that are always running in the background.","breadcrumbs":[{"label":"Building Docs"},{"label":"Software","emoji":"1f469-1f4bb"},{"label":"Appendix"}]},{"id":"F8YROPvLXkVlOAewVZYx","title":"Testing","pathname":"/build/testing","siteSpaceId":"sitesp_djzcg","emoji":"1f4cb","description":"Make sure your software and hardware actually work!","breadcrumbs":[{"label":"Building Docs"}]},{"id":"-MEsned1wOJbmVGDShhh","title":"Deployment","pathname":"/build/deploy","siteSpaceId":"sitesp_djzcg","emoji":"1f477-2640","description":"Guides and tips related to deploying your PANOPTES unit at it's final site.","breadcrumbs":[{"label":"Building Docs"}]},{"id":"-MEsqQ6nDng2sISgA7V0","title":"Site Planning","pathname":"/build/deploy/site-planning","siteSpaceId":"sitesp_djzcg","description":"This is an overview of what is required for the installation site of a PANOPTES unit.","breadcrumbs":[{"label":"Building Docs"},{"label":"Deployment","emoji":"1f477-2640"}]},{"id":"-MLU8OTdaz58RtVUs2_x","title":"Camera Focus","pathname":"/build/deploy/camera-focus","siteSpaceId":"sitesp_djzcg","description":"How to focus the cameras in a PANOPTES unit.","breadcrumbs":[{"label":"Building Docs"},{"label":"Deployment","emoji":"1f477-2640"}]},{"id":"-MEsqFfWN6mlgo1q_prC","title":"Polar Alignment","pathname":"/build/deploy/polar-alignment","siteSpaceId":"sitesp_djzcg","description":"This instruction set will help you polar align the PANOPTES unit once it has been deployed and is fully operational with cloud storage set up.","breadcrumbs":[{"label":"Building Docs"},{"label":"Deployment","emoji":"1f477-2640"}]},{"id":"-MJ3bfNqjXkBbhYerZuO","title":"Overview","pathname":"/build/deploy/polar-alignment/overview","siteSpaceId":"sitesp_djzcg","description":"This page will give you an overview of what polar alignment is and why you need to polar align your PANOPTES unit. If you are already familiar with the concept of polar alignment, skip to next page.","breadcrumbs":[{"label":"Building Docs"},{"label":"Deployment","emoji":"1f477-2640"},{"label":"Polar Alignment"}]},{"id":"7cm8paUWfQbsn2gPrT6a","title":"Drift Method","pathname":"/build/deploy/polar-alignment/drift-method","siteSpaceId":"sitesp_djzcg","description":"This page gives a brief overview of the drift method used to polar align the PANOPTES unit.","breadcrumbs":[{"label":"Building Docs"},{"label":"Deployment","emoji":"1f477-2640"},{"label":"Polar Alignment"}]},{"id":"-MJ3bxZ66OVMkVOt1I1X","title":"Procedure","pathname":"/build/deploy/polar-alignment/polar-aligning-panoptes","siteSpaceId":"sitesp_djzcg","description":"This instruction set will help you polar align the PANOPTES unit once it has been deployed and is fully operational with cloud storage set up.","breadcrumbs":[{"label":"Building Docs"},{"label":"Deployment","emoji":"1f477-2640"},{"label":"Polar Alignment"}]},{"id":"a26J16h8bzOtPDaz4jPS","title":"Find Misalignment","pathname":"/build/deploy/polar-alignment/polar-aligning-panoptes/find-misalignment","siteSpaceId":"sitesp_djzcg","description":"How to find polar alignment errors.","breadcrumbs":[{"label":"Building Docs"},{"label":"Deployment","emoji":"1f477-2640"},{"label":"Polar Alignment"},{"label":"Procedure"}]},{"id":"cxvTcvnnw9A5h0X5kTpk","title":"Fix Misalignment","pathname":"/build/deploy/polar-alignment/polar-aligning-panoptes/fix-misalignment","siteSpaceId":"sitesp_djzcg","description":"This page describes how to polar align your PANOPTES unit using the al (deg) and az (deg) values obtained from previous page.","breadcrumbs":[{"label":"Building Docs"},{"label":"Deployment","emoji":"1f477-2640"},{"label":"Polar Alignment"},{"label":"Procedure"}]},{"id":"-MDur2PYxg_fzl4SZyX9","title":"Operation","pathname":"/build/operation","siteSpaceId":"sitesp_djzcg","emoji":"1fa90","description":"How to control and operate your unit.","breadcrumbs":[{"label":"Building Docs"}]},{"id":"M9afY9juKiTfaYAbjQto","title":"Automatic Operation","pathname":"/build/operation/automatic-operation","siteSpaceId":"sitesp_djzcg","description":"How to set up your PANOPTES unit automated nightly operation","breadcrumbs":[{"label":"Building Docs"},{"label":"Operation","emoji":"1fa90"}]},{"id":"-MEsSMK9YeTcAt0-DBi4","title":"Manual Operation","pathname":"/build/operation/manual-operation","siteSpaceId":"sitesp_djzcg","description":"How to manually operate your PANOPTES unit to take custom pictures.","breadcrumbs":[{"label":"Building Docs"},{"label":"Operation","emoji":"1fa90"}]},{"id":"IGh5ggwVs8IQ0vZqVnaN","title":"Data","pathname":"/science/data","siteSpaceId":"sitesp_djzcg","emoji":"1f4ca","description":"Information about our data processing and results.","breadcrumbs":[{"label":"Science"}]}]}